Difference between revisions of "N2PK VNA"
From Note to self
(→Notes) |
(→Questions) |
||
Line 24: | Line 24: | ||
=== Questions === | === Questions === | ||
− | * All caps seem to be NPO, X7R, X5R, or Tant. NPO = temperature independant, X7R & X5R = ceramic, Tant = tantalum. Problem: I only have an assortment, no other specs (prob. ceramic?)... | + | * All caps seem to be NPO, X7R, X5R, or Tant. NPO = temperature independant, X7R & X5R = ceramic, Tant = tantalum. Problem: I only have an assortment, no other specs (prob. ceramic?)... '''According to Jacques, most small (pF) caps are NPO''' |
* R160a - R166a should be 221K. They are part of (what I assume to be) an RC filter, and a load for that filter (the input impedance of that buffer IC is probably quite high). These are digital lines. I don't have those values, so I was thinking about taking 1k2/75pF for the RC filter, and 270k for the load. I don't see why it should be very critical. | * R160a - R166a should be 221K. They are part of (what I assume to be) an RC filter, and a load for that filter (the input impedance of that buffer IC is probably quite high). These are digital lines. I don't have those values, so I was thinking about taking 1k2/75pF for the RC filter, and 270k for the load. I don't see why it should be very critical. | ||
+ | * Build notes talk about using silver solder, this is not really necessary I presume. |
Revision as of 12:40, 17 October 2013
Contents
Documentation
Notes
Components
Missing
Bottom side
- R160a - R166a: I used 270k instead of 220k
- C115-117,126,127: 10uF 16V X5R 1210
- C180-C184
- C170-C174
- R250: 3.3R 5% 0805 - I have 1.8R, 3.9R
- C250, 280,281,292: 10uF 16V Tant 20%
- C213, C290 100nF X7R
- C280,281,292
Top side
- C251 100nF X7R
- Q190,270: npn tx
- C125: 1uF 25V X7R 10%
Questions
- All caps seem to be NPO, X7R, X5R, or Tant. NPO = temperature independant, X7R & X5R = ceramic, Tant = tantalum. Problem: I only have an assortment, no other specs (prob. ceramic?)... According to Jacques, most small (pF) caps are NPO
- R160a - R166a should be 221K. They are part of (what I assume to be) an RC filter, and a load for that filter (the input impedance of that buffer IC is probably quite high). These are digital lines. I don't have those values, so I was thinking about taking 1k2/75pF for the RC filter, and 270k for the load. I don't see why it should be very critical.
- Build notes talk about using silver solder, this is not really necessary I presume.