Difference between revisions of "N2PK VNA"
From Note to self
| Line 3: | Line 3: | ||
* [http://n2pk.com/VNA/VNA-above5-2.jpg PCB top side] | * [http://n2pk.com/VNA/VNA-above5-2.jpg PCB top side] | ||
* [http://n2pk.com/VNA/VNA-below3-1.jpg PCB bottom side] | * [http://n2pk.com/VNA/VNA-below3-1.jpg PCB bottom side] | ||
| + | == Notes == | ||
| + | * For R160a - R166a I used 270k | ||
| + | |||
== Components == | == Components == | ||
=== Questions === | === Questions === | ||
* All caps seem to be NPO, X7R, X5R, or Tant. NPO = temperature independant, X7R & X5R = ceramic, Tant = tantalum. Problem: I only have an assortment, no other specs (prob. ceramic?)... | * All caps seem to be NPO, X7R, X5R, or Tant. NPO = temperature independant, X7R & X5R = ceramic, Tant = tantalum. Problem: I only have an assortment, no other specs (prob. ceramic?)... | ||
* R160a - R166a should be 221K. They are part of (what I assume to be) an RC filter, and a load for that filter (the input impedance of that buffer IC is probably quite high). These are digital lines. I don't have those values, so I was thinking about taking 1k2/75pF for the RC filter, and 270k for the load. I don't see why it should be very critical. | * R160a - R166a should be 221K. They are part of (what I assume to be) an RC filter, and a load for that filter (the input impedance of that buffer IC is probably quite high). These are digital lines. I don't have those values, so I was thinking about taking 1k2/75pF for the RC filter, and 270k for the load. I don't see why it should be very critical. | ||
Revision as of 22:49, 15 October 2013
Contents
Documentation
Notes
- For R160a - R166a I used 270k
Components
Questions
- All caps seem to be NPO, X7R, X5R, or Tant. NPO = temperature independant, X7R & X5R = ceramic, Tant = tantalum. Problem: I only have an assortment, no other specs (prob. ceramic?)...
- R160a - R166a should be 221K. They are part of (what I assume to be) an RC filter, and a load for that filter (the input impedance of that buffer IC is probably quite high). These are digital lines. I don't have those values, so I was thinking about taking 1k2/75pF for the RC filter, and 270k for the load. I don't see why it should be very critical.
